|Home||Why use MACS?||Injector||Ultrafilm||XT Aerosol||Salt-Enz||Users comments||Distributors||Technical||Safety||Instructions||FAQ|
Ultrafilm XT is a premium external treatment
for marine alloys and metals which is formulated to
Ultrafilm XT is suitable for
Product name: MACS Ultrafilm XT
An aerosol type corrosion inhibitor and filming agent for use on common metals. It is non hazardous to neoprene and has water displacement, lubricating and penetrant properties. The
inhibiting system used consists of all naturally occurring, biodegradable materials, friendly to our environment. UN 1950 - Class 2.1.
Visual: Clear amber fluid in aerosol form Density: 0.850 gm/ml Solubility: infinite in oil, emulsifiable in water (temporary) Boiling Point: Not applicable Freezing Point: Not applicable PH @ 5% emulsion: 8.5 Specific Gravity: 0.875 Solubility in Water: Emulsifies - short term Odour: Mild natural oil
Fire and Explosion Hazard Data:
Volatiles: 84% Flash point (COC): Not applicable Extinguishing Media: Water, water fog Steps to be taken in case
Keep cans cool with water or foam.
Aerosols may explode on heating.
Base solvent: Refined paraffinic hydrocarbon pH (emulsion): 8.5 Inhibitor system: Cationic (organic nitrogen compound) Aromatic content: nil Anti oxidant: Yes
Ingedients (Hazardous Chemicals):
Chemical entity Proportion Petroleum Distillate (refined) High > 80% Nonionic Surfactant Low < 10% Organic Nitrogen Compound Low < 10%
|Health Effect||First Aid|
|Swallowed:||Irritant to throat||
Give milk or water to drink.
DO NOT induce vomiting.
Seek medical attention immediately.
Not corrosive but may cause irritation
Flush with large quantities of fresh water.
Seek medical attention.
Non toxic by absorption. May irritate
on prolonged or repeated exposure.
|Wash with soap and water.|
May cause respiratory irritation.
Excessive inhalation may cause
dizziness or nausea.
Remove to fresh air. Seek medical